Wodschow RN10 VL-2 Instructions d'exploitation télécharger pdf (Page 13)

12a

13e

13d

Exchange the micro switch for the safety guard in the following way:

a) Remove the rear part (1), the lid of the mixer (2) and the operation

panel (3).

b) Take off the planetary head pulley (6D).

c) Remove the top plate (13A) by rst removing the four screws

(13B) and thereafter the screws (13C).

d) Loosen the screws (13D) in both sides. Turn the safety guard into

to horizontal position, and now the safety guard including ttings

(13E) with micro switch can be lifted up. The micro switch can

now be exchanged.

e) Screw the new micro switch on to the ttings, and follow the in-

structions in reverse order.

12 Exchange the micro switch for bowl lift in the following way:

a) Take off the cover plate (8A) on the back of the mixer.

b) Take out the frequency converter (8) with ttings (8D).

c) The bowl lift micro (12) with ttings (12A) can be taken out by

loosening the two screws (12B) and removing the two wires. The

micro can not be exchanged.

d) Mount the new micro switch by following the instructions in reverse

order. No adjustment is required.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 19 20

Pas de commentaire

Wodschow RN10 VL-2 Instructions d'exploitation Page 13